Should Patio Be Flush With Grass

We use our patios for entertainment, grilling, holding parties, or even plain relaxation during leisure. As such, the patio should be appealing and comfortable to spend time on.

This leads us to a commonly asked question; should patio be flush with grass? We will address this common question throughout this page.

Apparently, we design patios depending on our yards. Some yards are sloppy, others are level, and some are even highly sloppy.

That aside, several other factors come to play while designing a patio. Examples are height, drainage, and building materials.

So, Should Patio Be Flush With Grass?

A patio should be flush with grass. And all vary depending on how you cut your grass and other maintenance practices.

The slope of your homestead may also determine the grass around the patio. Further, what you want to achieve as a homeowner.

Some homeowners may decide to have their whole homestead paved. Others may decide to have trees, especially in sandy regions where grass may be hard to grow.

Nevertheless, flushing a patio with grass has the following benefits; 

1. Aesthetic look

The grass around the patio gives an appealing look. Remember, the essential purpose of having a patio is to relax your mind.

Connecting with nature is one way to relax, and grass vegetation does wonders.

2. Prevents soil erosion

Grass covers the soil, and in this way, you will never have wind blowing dust around your home.

Secondly, your topsoil will never be carried away by the groundwater. Soil erosion prevention helps create a strong patio foundation that can last for years.

3. You can hold other activities around

You may decide to relax on the grass and enjoy the sun at times. This can be during morning or evening hours.

In another case, you may use the grass area to host several guests if your patio isn’t spacious. Other activities like grilling and general cooking can be carried out around the yard.

How to Flush Patio With Grass

There are several rules you should follow when setting up your patio. Take a look;

The patio height

The patio should be at least 0.5 to 1.5 inches above the grade. Raising the patio to this height is to have a space for the grass to grow and have both at a level.

Let’s face it;

If you set the patio on the same level as the grade, the grass planted may grow over the patio and won’t give a good view. You may feel that the patio is too low.

Secondly, drainage may be an issue. This is because the water may not easily flow when the grass is higher and the grade is the same level as the patio.

Typically, grass should be padding under your feet. But still, you need to maintain by cutting it to maintain this view.

Once you trim the grass to the same level as the patio, you will notice excellent drainage. That aside, you will notice a powerful transition in both when you walk around.

Also read: What is the best indoor TV to put in a covered patio?

What if the grade is sloppy?

If the grade is sloppy, level the area you would put up a patio by excavation. Note that it doesn’t have to be level on all sides to effectively flush with the grass.

You can flush the grass on the lower side only. And if you will have to flush the grass all around, retain a wall to hold the dirt on the higher side.

Build steps or a good foundation to ensure your patio is in good condition on the ground below.

Also read: Best-budget (Under $500) patio dining sets

The Patio Slope

You should design the patio with a slope of at least two degrees. The primary motive for adding a slope is to direct water from the patio area.

You wouldn’t want to have a pool of water around the patio, and every morning after rains, you have to drain it.

Add a slope for the water to drain towards the lower side from the higher side. On the other hand, if your patio is around the house, redirect water from the gutter away to avoid pooling around the area.

Ideally, add guard rails on the lower side to avoid accidents if the area is steep. You can design some stairways to get into the grass area.

What About Excavation?

Needless to say, you cannot build right on top of the dirt. You need to excavate to create a good foundation.

The depth of your foundation will be determined by the type of patio you are building. Most foundations are about four to five inches of compacted base materials.

Usually, the height is added with crushed stones, and the paver is laid afterward. For a concrete patio lower than grass, you need to have some concrete walls all around the area.

Secondly, you will have to install underground drainage pipes, which can be costly.

A raised patio is simple to maintain due to enhanced drainage. So, always consider patio higher than lawn.

Also read: Best high weight capacity patio furniture

Best Patio Surfaces for Grass

Nearly all patio surfaces are compatible with grass if the patio is raised to the recommended height. The best surfaces you can make are;

1. Concrete

The concretes are long-lasting, and they can be easily modified. You can paint your floor with different colors and make various patterns.

2. Clay bricks

They are referred to as paving stones. One benefit of clay bricks is that they are readily designed, and your DIY task will be laying them around.

Secondly, clay bricks are available in different colors, sizes, and arrangement patterns. Unfortunately, they can get hot during summer if the patio isn’t covered.

Also read: How to get rust stains out of stone pavers

3. Concrete pavers

They are just like clay bricks, only that they are thinner and lighter. However, they are less likely to crack.

4. Flagstones

They have a rough texture which is good for traction during wet seasons. To install flagstones, you need a professional.

5. Gravel

Gravel is inexpensive and also attractive due to its colors. Additionally, gravel is also easier to maintain.

FAQs- Should Patio Be Flush with Grass