As an Amazon Associate we earn from qualifying purchases at no extra cost.

How To Remove Spark Plug from Lawn Mower

How To Remove Spark Plug from Lawn Mower

When it comes to lawn mowers, many things can go wrong. One of the most common problems is when the spark plug stops working properly. If this happens, you’ll need to remove the spark plug and replace it with a new one.

Luckily, this is a relatively easy process that anyone can do. In this blog post, we’ll show you how to remove spark plug from lawn mower.

Read on, and learn the steps for this simple task.

How to Remove Spark Plug from Lawn Mower-Step by Step

What you will need:

  • Extension Wire (Ratchet will be useful too)
  • Spark Plug
  • An assistant
  • New Spark Plug
  • Multimeter (optional but recommended)

Step: 1. Make sure your lawn mower is turned off and that it’s not running. Also, make sure to remove the old spark plug properly. Do not use any tools or anything else that can damage it because this will be important for getting the lawn mower started again.

Step: 2. Find out where your spark plug wire is located. It’s best to do this by visually inspecting it because there are often multiple wires that can come from different places. You need to find out which one is your spark plug wire because the other ones are for other components on your lawn mower.

Step: 3. Once you have found the right wire, disconnect it using your ratchet or an extension wire. Make sure to stand somewhere safe when doing this because there may be sparks flying out of your lawn mower.

Step: 4. Now that the spark plug wire is disconnected, everything else should fall into place easily. Your goal now is to take off the old spark plug by unscrewing it. You can do this by hand or with a ratchet.

Step: 5. After unscrewing the old spark plug, replace it with the new one and screw it back in. It’s always best to use the same spark plug type for your lawn mower so that everything works properly again.

Step: 6. If you have a multimeter, you can use it to test the new spark plug. This is an optional step, but it will tell you if your lawn mower has started working again or not.

If you put the red screen of the multimeter on top of the spark plug’s end and then pull that off with your hands, there should be enough power for a small spark to come out. If that is not happening, your lawn mower will not work again.

How to store lawn mower battery for winter

Step: 7. After everything is done, all you have to do now is put the new spark plug wire back onto its original place and connect it. Make sure to do this securely so that sparks don’t fly.

Step: 8. Now, you can go ahead and start your lawn mower again to see if it works properly. If everything is done right, your lawn mower should turn on just fine after this repair. Good luck.

Also read: miniature toy lawn mowers

Signs Your Spark Plug Needs Changing

There are a few signs that can indicate that your spark plug needs changing:

1. Trouble Starting Up

If your lawn mower is difficult to start up, then this could be a sign of a faulty spark plug. There’s a chance that the gap between the piston and the wire on the spark plug is small and needs replacing.

2. Engine Dies Quickly

Another sign is if your lawn mower dies quickly when using it. This might be because the spark plug wire has worn out over time which causes the power to stop flowing through it.

You can fix this by replacing your spark plugs with new ones, and then everything should work fine again.

Also read: Which engine oil does Kawasaki mower take?

3. Poor Performance

If your lawn mower is performing poorly, this might be a sign that there’s something wrong with the spark plug. There could be something blocking power flow, so you need to check on that as soon as possible.

4. Engine is Hard to Start

If your lawn mower is difficult to turn on, it could be because the spark plug wire is faulty. The spark doesn’t have enough power to reach the engine, so you need to replace it with a new one as soon as possible before there are more problems.

Also read: Lawn tractor dump carts reviews

5. Foul Smell Comes Out of the Engine

If there is a really bad smell coming out of the engine that smells like gas, then it could be because your spark plug wire is faulty.

The power isn’t reaching the piston, which causes everything to combust badly, making an awful smell come up.

Also read: How to unflood a lawn mower

6. Smoke Comes Out of the Lawn Mower

Another sign of a faulty spark plug is smoke coming out of the mower engine. This isn’t good for your lawn mower, and it can also be a health hazard, so you should find a new spark plug wire as soon as possible before there are more problems.

7359823858 fa4bbe4db4 c

FAQ’s on Removing Spark Plug from Lawn Mower

Do You Need a Spark Plug Socket to Remove a Spark Plug?

No, you don’t need a spark plug socket to remove a spark plug. It is much easier if you can turn the spark plug by hand.

That way, you can decide exactly when to pull it out of the lawn mower’s engine.

Can You Remove Spark Plugs by Hand?

Yes, you can remove spark plugs by hand. However, it can be difficult to get the plug out if it is stuck. You may need to use a spark plug socket to remove the plug.

This tool is specially designed to fit the plug securely but is still small enough to fit in the spark plug cavity.

Can You Use Wd40 to Remove Spark Plugs?

WD-40 can be used to remove spark plugs, but it’s not the best method. The lubricant can help loosen up the plug, so it’s easier to take out, but you may still need a spark plug socket or wrench to get the job done.

How to clean lawn mower gas tank 

Now that you know how to remove spark plug from lawn mower, it’s time to put this knowledge into practice.

Be sure to always wear safety goggles when working with any machinery and read the manufacturer’s instructions thoroughly before starting.

If you have any questions about properly maintaining your lawn mower, don’t hesitate to reach out to us for more information. Thanks for reading, and happy mowing.

Author

  • Rickie

    Hi, I’m Ricky. I’ve been involved in lawn care and landscaping from when I was 15. To be honest, I didn’t like the idea of pushing mowers, collecting grass clippings, and maintaining flowerbeds at the time. But having seem the passion my parents had for gardening and outdoors and the effort they put in maintaining the health and beauty of our landscape, I couldn’t help but not only admire their hard work but also I became a part of it. As someone who loves to spend time with nature’s best, I find myself learning a lot more about gardening and outdoors on a daily basis. Not to mention I love to share the knowledge I’ve gathered over the years with my readers at We Mow Dallas. To be clear, I don’t have a Master’s degree in gardening or anything like that. Everything I’ve learned about gardening, landscaping, and lawn care spring from passion and engagement with my parents. And with a ton of free information out there, plus the ability to run tests and determine what works best for lawn care and landscaping, every day is an opportunity to learn and implement something new. My goal with We Mow Dallas is to teach you exactly how to maintain your lawn and landscape. And since I walk the talk in reality, you shouldn’t hesitate to join me in this wonderful world of landscaping and lawn care.

Share on:

Leave a Comment

Your email address will not be published.