Mold can grow anywhere, but it tends to spread in damp and dark areas. However, with a bit of rain and relative sunlight, it spreads pretty quickly.
By the simple fact that you have your lawn chairs outside all the time, it is more than likely that you will get some mold growing on them.
Plastic, wood, and fabrics are all susceptible to mold growth, and if you fail to deal with the spread in time, the infected chairs will start to give off a strong odor as the mold spreads.
This may also result in health complications, especially for people with asthma or allergies. Therefore, it’s imperative that you understand how to remove mold from lawn chairs.
But how can you get rid of the mold without ruining the chair itself? Well, read on and find out!
- How to Remove Mold from Lawn Chairs
- 1. Using Bleach
- 2. Using Mold Spray
- 3. Using White Vinegar
- 4. Ammonia Solution
- How to Remove Mold from Plastic Outdoor Furniture
- How to Prevent Mold on Outdoor Furniture
- 1. Proper Furniture Maintenance
- 2. Using an Anti-Mold Spray
- 3. Routine Cleaning
- 4. Using Furniture Covers
- 5. Choosing the Right Outdoor Furniture
- How to Remove Mold from Lawn Chairs (FAQs)
- What causes mold on outdoor furniture?
- How do you prevent mold on outdoor wood furniture?
- Does vinegar kill mold?
How to Remove Mold from Lawn Chairs
You need to realize that it’s crucial to eliminate the mold as it starts to grow. If you wait too long, the spread may get uncontrollable and make it impossible to deal with the fungal growth.
Either way, there are a few methods you can employ that will help solve your problem.
1. Using Bleach
The use of Bleach is one of the most common and cost-effective ways to eliminate mold.
The chemical reaction of Bleach on mold will ensure that the fungal growth is successfully removed.
You’ll have to dilute the bleach with water and spray it onto the infected areas.
You can, for example, mix one part of Bleach with two parts of water.
However, the bleach doesn’t kill the mold but only helps in the cleaning process.
Do not worry; the solution won’t damage your chair in any way.
However, you need to be extra careful when using it since too much exposure may irritate your skin and eyes. Always wear gloves and goggles when handling the solution.
2. Using Mold Spray
If you’re dealing with a more severe infection, you’ll need to obliterate the mold. In that case, it’s best to use a specially designed anti-fungal spray or powder.
The spray will eliminate all traces of the mold and leave a protective covering that will make it impossible for mold to grow in the same area.
3. Using White Vinegar
While Bleach is effective, it can be a powerful substance that may not be ideal for use around the lawn. In such cases, you could try using white vinegar instead.
This will work by breaking down the mold and absorbing the liquid inside it to ensure no trace of fungal growth is left behind
Mix a cup of bleach and a gallon of water in a spray bottle. Spray the solution on the affected area and allow it to stand for 30 minutes.
After this time, you can use a sponge or cloth to remove all traces of vinegar from the chair.
The mold will be gone, and no need to worry about any side effects.
4. Ammonia Solution
This is yet another option – and it’s also very cheap.
You will need to mix one part of ammonia with two parts of water and some baking soda, which you can spray on the infected area.
Allow it to stand for a few hours, and then rinse off any excess solution with clean water. If there’s still some left after that, use a detergent to remove it.
How to Remove Mold from Plastic Outdoor Furniture
If you own plastic chairs, tables, or any other type of outdoor furniture made from a form of plastic, the hard fact is that mold can form on them.
All it takes is for water to seep into the cracks or gaps, and mold will grow almost overnight.
The good news is that you can remove mold from plastic outdoor furniture very easily with a few simple methods. You need to find out where the mold has spread and treat it accordingly.
- The most effective way is to use a mold deterrent spray available in many home improvement stores.
- If you’re looking for something more natural to use, white vinegar also works effectively against mold growth on furniture made from plastic.
Add 1 part vinegar with three parts water and spray this mixture onto the infected area. Let it stand for some time, and then wipe it off with a sponge.
3. The third method you can use is to mix bleach and water (or ammonia) into a solution and spray it onto the infected area.
However, this may discolor any colored plastic chair, so be sure to test it before using it on your expensive furniture piece.
Best lawn fungicide for red thread
How to Prevent Mold on Outdoor Furniture
While some tips may help you get rid of mold, you need to take preventative measures as well. Some of these include:
1. Proper Furniture Maintenance
One of the best ways to stop mold from populating your furniture is to provide good maintenance.
Keep a check on any cracks where water can seep in; this will ensure that enough sunlight and air will get through, allowing early detection of the fungal growth.
2. Using an Anti-Mold Spray
The most effective way to prevent mold from growing is to keep using an anti-mold spray.
This substance works by stopping mold growth in its tracks and will continue to protect your furniture for a long time.
Most are available at home improvement stores and online outlets.
3. Routine Cleaning
Another very effective way of preventing the spread of mold is to clean it regularly.
Maintain a regular schedule for this, washing or wiping off soiled chairs every month or after each season if exposed to harsh weather conditions.
You can remove any mold growth with a mild detergent.
4. Using Furniture Covers
Furniture covers efficiently protect your chairs, chaise lounges, and other such outdoor furniture pieces from the mold.
They are available in several styles to match the furniture you own so that they won’t be too conspicuous either.
You can get one for every season if you wish, using heavy-duty covers during winter and lighter ones when it’s warmer.
5. Choosing the Right Outdoor Furniture
As this article has shown you, keeping mold out of your outdoor furniture is possible. However, to achieve this goal, you need to know what materials are suitable for preventing fungal growth and which ones are not.
Make sure that any newly bought piece of furniture is made from a mold-resistant material. You can find further information about this in the instructions provided by the manufacturer, in some cases online.
How to Remove Mold from Lawn Chairs (FAQs)
What causes mold on outdoor furniture?
Mold is caused by excessive exposure to water. This could be because of excessive rain or a leaky roof, and it also applies to furniture left outside.
It spreads by spores, which are then blown by the wind or carried by water droplets.
How do you prevent mold on outdoor wood furniture?
The best way to prevent mold on outdoor wood furniture is to make sure that it’s regularly cleaned.
It would help if you also wiped off any leaves and grime from your lawn chairs regularly.
Does vinegar kill mold?
Vinegar has anti-fungal properties effective for reducing the spread of mold for a long time.
It also adds shine and helps to remove other stains from the furniture as well.
How to keep lawn furniture from sinking into grass
In this article, we’ve talked about how to remove mold from outdoor furniture. We’ve given you a few methods that will work for plastic or any other form of material as well.
The most effective way is with an anti-mold spray and if the problem persists, use more extreme measures like Bleach.
We also discussed some preventative measures, so your lawn chairs don’t get infected in the first place, which included proper maintenance and using covers when necessary.
How do you protect your lawn chairs against mold? Let us know what kind of tips have worked for you in our comments section below.