How to Make a Lawn Leveling Rake in 4 Easy Steps

Looking for a way to level your lawn without spending a fortune on equipment? Leveling your lawn is key to having a beautiful yard. Not only does it make your grass look better, but it also helps with drainage and keeps pests away.

A level lawn is the foundation of any good landscaping project. With the right tools and some know-how, you can have the perfect yard without spending hours or days on it.

Read on to find out how to make a lawn leveling rake yourself with a few simple tools.

Why Make a DIY Lawn Leveling Rake?

There are a few reasons why you might want to make your lawn leveling rake.

• You may not have the money to buy a commercial rake
• You may not have access to a store that sells them
• You may want to customize your rake to fit your specific needs

No matter your reason, making your own leveling rake is a simple project that can be done in just a few hours.

What to Keep in Mind When Making a Lawn Leveling Rake

There are a few things to keep in mind when making your own lawn leveling rake.

1. Carry Good Quality Tools

One of the most important things when making any tool is to use good quality materials. This will ensure that your rake is strong and durable and will last for years.

2. Choose the Right Materials

The materials you choose for your lawn leveling rake are important, as they need to withstand the wear and tear of use. Metal is a good choice for this type of project, as it is strong and durable.

3. Get the Right Size

Another important thing to keep in mind when making your own lawn leveling rake is to make sure you get the right size. The rake should be big enough to do the job, but not too big or bulky that it is difficult to use.

4. Protect your Hand

When using a lawn leveling rake, it is important to protect your hand. A good way to do this is to use a glove or wrap your hand in a cloth. This will help to prevent any injuries from occurring.

Also read: Tow behind gravel rake for lawn tractor

How to Make a Lawn Leveling Rake

Now that you know what to keep in mind when making your lawn leveling rake, it’s time to get started. Here is a step-by-step guide on how to make one yourself.

Tools That You’ll Need

• An Impact Ratchet
• 5mm & 3mm Hex Bit
• M8 & M10 Drill Bit
• Two 12-Inch Aluminum Angles
• Two 24-Inch Aluminum Angles
• Three 24-Inch Aluminum Channels
• M8 x 20mm Counter Sunk Bolts
• M8 x 35mm Counter Sunk Bolts
• M8 & M5 Lock Washers
• M8 & M5 Washers
• 10 M5 Nuts
• 2 M8 Nuts
• 1 Broom handle
• 1 Broom Adapter
• 1 Broom Bracket

Also read: what does a power rake do

Step 1: Making the Leveling Rake Frame

The frame for your lawn leveling rake is simple to make and can be done with a few basic tools.

• Using the 5mm hex bit, drill two holes in the center of one of the 12-inch aluminum angles.
• Drill two more holes 2 inches from the ends of the angle.
• Drill two more holes 2 inches from the other end of the angle.
• Using the 3mm hex bit, drill a hole in the center of each of the four corners of the angle.
• Using the drill bit that is the same size as your screws, drill four holes at each angle.
• Thread one of the M8 x 20mm bolts through two holes in one angle, and then do the same with the other angle.
• Secure them together using a washer and nut on each side.
• Repeat this process for the other end.

Step 2: Setting up the Channels

Now that you have the frame for your lawn leveling rake, it’s time to set up the channels.

• Using the drill bit that is the same size as your screws, drill four holes in each of the three channels.
• Thread one of the M8 x 35mm bolts through two holes in one channel, and then do the same with the other channel.
• Secure them together using a washer and nut on each side.
• Repeat this process for the third channel.

Also read: Best lawn rakes for sticks

Step 3: Aligning and Inserting the Bracket

Now that you have the frame and channels set up, it’s time to insert the bracket.

• Align the two 24-inch aluminum angles so that they are perpendicular to the frame.
• Thread one of the M8 x 20mm bolts through two holes at one angle, and then do the same with the other angle.
• Secure them together using a washer and nut on each side.
• Repeat this process for the other end.

Step 4: Fitting the Handle and Trial

Now that you have the frame, channels, and bracket set up, it’s time to fit the handle and do a trial run.

• Fit the broom handle into the hole in the bracket.
• Secure it in place using the broom adapter and bolt.
• Thread one of the M8 x 20mm bolts through two of the holes in the adapter, and then do the same with the other adapter.
• Secure them together using a washer and nut on each side.

Also read: Best garden rakes for leaves

Take the rake for a test drive. Adjust the position of the handle until it feels comfortable for you. Once you have a perfect position, tighten the nuts on the adapter and bracket to secure it in place. You’re now ready to start leveling your lawn.

FAQs on How to Make a Lawn Leveling Rake

A lawn leveling rake is a landscaping tool used to smooth out the soil’s surface, making it easier to level and seed. It can also be used to remove debris from the soil’s surface.

The lawn leveling rake has a long handle and a row of metal tines spaced about 2 inches apart. The tines are angled so that they curve towards the ground.

This design allows them to move more soil than if they were straight. The rake is also weighted to stay in place as you move it across the lawn.

The best way to use the lawn leveling rake is to first loosen up the soil with a shovel or garden hoe. Then, use the rake to smooth out the surface.