You have moved into your new home or have just been using your patio during the day without lights. Or maybe you have been using kerosene lamps on the patio during the night. And eventually, you decide to light a world of difference to make the home look better.
How to hang patio lights without nails can be a hassle. Options may be limited depending on where you want to hang your lights exactly.
However, we have gathered several ideas in this post on hanging the lights without nails that will work for you. And as a homeowner, you will enjoy the look of the patio lights.
Plus, if you decide to hold a party or a family meeting on the patio, the area will look unique. So get ready to equip yourself with effective ways to hang patio lights without nails.
- Why Installing Patio Lights With Nails Should Be Your Last Option
- How to Hang Patio Lights Without Nails
- 1. Hot Glue Gun
- 2. Staples
- 3. Gutter Hooks
- 4. Adhesive hooks
- 5. Use a Tape
- 6. Wrap the Lights along the Railing
- 7. Use Zip Ties
- 8. Potted plants
- 9. The trees or fence
- 10. Use wire hangers
- 11. Shingle tabs
- FAQs About How to Hang Patio Lights Without Nails
- How Do You Hang Outside Lights Without Drilling?
- How Do You Secure a Patio Light?
- How Many Feet of String Lights Do I Need for Patio?
Why Installing Patio Lights With Nails Should Be Your Last Option
Are you tempted to reach for your claw hammer and the box of nails to install your patio lights? Hold on!
Nails can damage the ceiling or the railing if you try to drive them for lights hanging. Secondly, they will be difficult to remove. And once you remove them, they will leave holes on the surfaces that are costly to fill.
Another challenge is when these holes get moisture and form mildew. Your patio will look filthy.
In addition, nails aren’t flexible because they bend and weaken in the process of removing them.
With that said, you should opt for cheaper and flexible methods to hang lights on your patio. And without further ado, read on to learn our brilliant ideas.
How to Hang Patio Lights Without Nails
1. Hot Glue Gun
If you have been figuring out how to hang lights on concrete wall without drilling, the hot glue gun method will work.
The benefit of using a hot glue gun is that the glue doesn’t weaken with different weather conditions. Further, it’s inexpensive and readily available in most hardware stores.
First, connect the gun to the power outlet and allow it to heat before attaching the string lights. Afterward, direct the gun to each point you want to attach the lights and press the trigger.
Unfortunately, you will have to hold the lights at every point until the glue cools and dries. The task is just pressing the light string against the surface.
Another drawback of the hot gun glue method is that the glue marks will be left on the surface even after removing the lights.
However, you can use a scraper to remove them.
Using staples is another fantastic method to attach your string lights to the roof. Luckily, staples can be easily removed with pliers. Additionally, they leave small, less visible pinholes on the surface.
If you decide to use this method, go for carpentry staplers because ordinary office staplers may not suit the job.
3. Gutter Hooks
Gutter hooks for patio lights can be another excellent idea. They are S-shaped and commonly used by many homeowners. You will have to attach one side to the gutter and hang the string lights on the lower side.
Gutter hooks are easily removable, and you will find them in most home improvement stores. Usually, they are sold in packs.
4. Adhesive hooks
Adhesive hooks are another type of outdoor hook for string lights. They are just like the gutter hooks, only that they have a stick and peel option.
You will have to stick the flat surface on the ceiling or the wall surface and hang the string lights on the hook.
When choosing adhesive hooks, go for brands that will withstand the weight of the lights. Always read the descriptions before purchasing.
5. Use a Tape
I decided to use duct tape on my patio, but it didn’t look good. I opted for a clear tape, and the whole patio ceiling looked amazing.
So, duct tape will ruin the aesthetic look of the ceiling unless you have painted it a dark color, which is rare.
When sourcing a clear tape, look for the best quality firmly to hold the lights without peeling off with time.
Ideally, you can attach several tapes closely to create better adhesion for the whole lights and string weight.
6. Wrap the Lights along the Railing
Wrapping the string lights along the patio railing can be another fantastic method. The lights will give an aesthetic look to the railing since they will be at a lower level.
Further, the lights will never obstruct people. When sourcing for your lights, go for the set with a string color similar to the railing paint to make it more appealing.
On the other hand, you can find colors closely matching your railing paint color.
See also: Which indoor TV best suits a covered patio?
7. Use Zip Ties
Zip ties are widely used in our homes and factories for packaging. However, you can use them just like the gutter hooks to hold your string lights.
Zip ties are flexible because you can use them on the railing or roof gutters.
8. Potted plants
You can place your potted plants on the shelves and hang the string lights on them. However, ensure the plants are strong enough to withstand the weight.
Also read: Trees that can grow in pots outdoors
9. The trees or fence
Wrap the string lights on the tree branches around the patio or lay them along the fence. You can criss-cross them on the trees around to create an appealing pattern.
See also: How do you string up patio lights when you don’t have trees?
10. Use wire hangers
Instead of just disposing of excess wire hangers, use them to hold the string lights along the patio ceiling like the gutter hooks.
11. Shingle tabs
Clip the shingle tabs along the ceiling edges where you find tiny gaps and hang your lights around the patio.
See also: Outdoor patio air conditioners reviews
FAQs About How to Hang Patio Lights Without Nails
How Do You Hang Outside Lights Without Drilling?
Adhesive hooks are commonly used to hang outdoor patio lights without drilling. Most brands are reusable hence easy transferring of the lights to different locations.
How Do You Secure a Patio Light?
There are several ways to secure patio lights. Take a look;
1. Hot glue gun
3. Wrapping their string on objects.
How Many Feet of String Lights Do I Need for Patio?
Buy the string lights around 5 feet extra length from your linear measurement. This will allow you to criss-cross string lights along the ceiling. You can also opt to hang the patio lights from the ceiling to create the best patterns.
With the above information, it’s clear that how to hang patio lights without nails isn’t a hassle.